Your Cart

d&b audiotechnik ALi90 Loudspeaker

conventional loudspeakers - line array  - technology - sound - d&b audiotechnik ALi90 Loudspeaker Line Array Loudspeakers
d&b audiotechnik ALi90 Loudspeaker

d&b audiotechnik ALi90 Installation specific medium format LF: 2 x 10"/HF: 1.4" augmented array loudspeaker.

For more information please open the following link: ALi90 Technical Data

  • Condition: New
  • Stock: Price on Request
  • Model: N-dbau-ali90-0001
  • Location: Bulgaria,Greece
Price Ex Vat

Available Options

conventional loudspeakers

line array


ALi90 Loudspeaker

The ALi90 is the installation variant of the AL90 augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe is used, up to four cabinet modules can be flown in vertical columns producing a 90° constant directivity dispersion pattern in the horizontal plane. The ALi90 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.
The ALi90 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with a 3" diaphragm mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently.
Splay angles between adjacent cabinets can be set in a range from 20° to 40° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, with a maximum total coverage of 150° per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 370 Hz.
The cabinet enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric. Three M10 threaded inserts are incorporated in one side panel to allow the secure attachment of a dedicated flying adapter.


Speaker Diameter
LF Nominal Diameter2x 10"
HF Nominal Diameter1.4"
Nominal Impedance
Loudspeaker Nominal Impedance8 Ohms
Power Capacity
Loudspeaker Power Capacity (RMS/peak 10 ms)400/1800 W
Frequency Range
Frequency Range60 Hz - 18 kHz
Dispersion Angle90° x 30°
SPL Max139 dB
SPL Min138 dB

Write a review

Note: HTML is not translated!
Bad Good