Menu
Your Cart

d&b audiotechnik Z5744 KSLi-SUB Mounting Frame

audio rigging - technology - sound - d&b audiotechnik Z5744 KSLi-SUB Mounting Frame Audio Rigging
d&b audiotechnik Z5744 KSLi-SUB Mounting Frame


d&b audiotechnik Z5744 KSLi-SUB Mounting Frame for up to 6x KSLi-Series line array speakers below 2x KSLi-SUB subwoofers.

Z5744 KSLi-SUB Mounting frame (550 kg/1212.5 lb) consist of:
1x d&b audiotechnik Locking pin Locking pin (type D, 10 x 35mm)
1x d&b audiotechnik Rear link Rear link including fixing bolt
1x d&b audiotechnik Fixing points. The Mounting frame is equipped with four fixing points for suspension using shackles
1x d&b audiotechnik Shackle Four 3.25 t shackles are provided for hoisting purposes
1x d&b audiotechnik Mounting plate The Mounting plate is used to attach the d&b Z5711 ArraySight sender unit
4x d&b audiotechnik dedicated holes are provided at the front of the frame
1x d&b audiotechnik Lifting pin Four lifting pins (T-handles) are provided to serve as a temporary lifting aid for the cabinets during setup

  • Condition: New
  • Stock: Price on Request
  • Model: dbaudio-z5744-01
  • Location: Bulgaria,Greece
0.00€
Price Ex Vat

audio rigging

technology

sound

Z5744 KSLi-SUB Mounting frame

The Z5744 KSLi-SUB Mounting frame is designed to support a total system weight of 550 kg (1212.5 lb) - SWL including all rigging components.
This allows the suspension of a maximum of 6 x KSLi-SUB cabinets. For mixed array setups consisting of a maximum of 6 x KSLi-TOP cabinets below 2 x KSLi-SUB cabinets, the frame supports a total system weight of 600 kg (1322.8 lb) - SWL including all rigging components.

Z5744 KSLi-SUB Mounting frame consist of:
1x d&b audiotechnik Locking pin Locking pin (type D, 10 x 35mm)
1x d&b audiotechnik Rear link Rear link including fixing bolt
1x d&b audiotechnik Fixing points. The Mounting frame is equipped with four fixing points for suspension using shackles
1x d&b audiotechnik Shackle Four 3.25 t shackles are provided for hoisting purposes
1x d&b audiotechnik Mounting plate The Mounting plate is used to attach the d&b Z5711 ArraySight sender unit
4x d&b audiotechnik dedicated holes are provided at the front of the frame.
1x d&b audiotechnik Lifting pin Four lifting pins (T-handles) are provided to serve as a temporary lifting aid for the cabinets during setup

Write a review

Note: HTML is not translated!
Bad Good