Your Cart

d&b audiotechnik KSLi8 Loudspeaker

line array  - technology - sound - d&b audiotechnik KSLi8 Loudspeaker Line Array Loudspeakers
d&b audiotechnik KSLi8 Loudspeaker

d&b audiotechnik KSLi8 Installation specific medium to large format LF: 2 x 10" + 2 x 8"; MF: 1 x 8"; HF: 2 x 1.4" line array loudspeaker.

For more information please open the following link: KSLi8 Technical Data

  • Condition: New
  • Stock: Price on Request
  • Model: N-dbau-ksli8-0001
  • Location: Bulgaria,Greece
Price Ex Vat

Available Options


KSLi8 Loudspeaker

The KSLi8 is the installation variant of the KSL8 line array loudspeaker for medium to large scale sound reinforcement. The KSLi8 line array module produces an 80° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSLi8 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device.
SL-Series flying hardware comes with a patented workflow with integrated tension rigging mode, allowing splay angles between cabinets from 0° to 10° in 1° increments. The loudspeakers are driven actively by two channels of an appropriate d&b amplifier. One channel powers the 10” LF drivers, the second channel powers all other components, which are passively crossed-over. This component geometry allows for a smooth crossover design with well-defined overlaps between adjacent bands providing consistent, even and very accurate horizontal dispersion. Due to the arrangement of the front and side firing LF drivers, seamless directivity control is maintained from the lowest frequencies the loudspeaker produces to above 18 kHz. Further expanding flexibility and catering for applications where smaller arrays are used and ArrayProcessing is not required, the KSLi8 includes the option to link two cabinets in Line or Arc mode.
The cabinets are constructed from marine plywood and have an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front and side panels incorporate rigid metal grills backed by an acoustically transparent and water repellent fabric.

Speaker Diameter
LF Nominal Diameter2x 10" + 2x 8"
MF Nominal Diameter8"
HF Nominal Diameter2x 1.4"
Nominal Impedance
Loudspeaker Nominal ImpedanceFront LF: 8 Ohms - Side LF/MF/HF: 8 Ohms
Power Capacity
Loudspeaker Power Capacity (RMS/peak 10 ms)Front LF: 450/1800 W - Side LF/MF/HF: 250/1000 W
Frequency Range
Frequency Range54 Hz - 18 kHz
Dispersion Angle80°
SPL Max145 dB

Write a review

Note: HTML is not translated!
Bad Good