Your Cart

d&b audiotechnik KSL12 Loudspeaker

line array  - technology - sound - d&b audiotechnik KSL12 Loudspeaker Line Array Loudspeakers
d&b audiotechnik KSL12 Loudspeaker

d&b audiotechnik KSL12 Medium to large format LF: 2 x 10" + 2 x 8"; MF: 1 x 8"; HF: 2 x 1.4" line array loudspeaker.

For more information please open the following link: KSL12 Technical Data

  • Condition: New
  • Stock: Price on Request
  • Model: N-dbau-ksl12-0001
  • Location: Bulgaria,Greece
Price Ex Vat

Available Options



KSL12 Loudspeaker

The KSL12 line array module produces an 120° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSL12 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device.
SL-Series flying hardware comes with a patended workflow with integrated tension and compression rigging modes, allowing splay angles between cabinets from 0° to 10° in 1° increments. The loudspeakers are driven actively by two channels of an appropriate d&b amplifier. One channel powers the 10” LF drivers, the second channel powers all other components, which are passively crossed-over. This component geometry allows for a smooth crossover design with well-defined overlaps between adjacent bands providing consistent, even and very accurate horizontal dispersion. Due to the arrangement of the front and side firing LF drivers, seamless directivity control is maintained from the lowest frequencies the loudspeaker produces to above 18 kHz. Further expanding flexibility and catering for applications where smaller arrays are used and ArrayProcessing is not required, the KSL12 includes the option to link two cabinets in Line or Arc mode.
The cabinets are constructed from marine plywood and have an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front and side panels incorporate rigid metal grills backed by an acoustically transparent and water repellent fabric. Each side panel incorporates a recessed handle, with additional handles provided at the rear.

Speaker Diameter
LF Nominal Diameter2x 10" + 2x 8"
MF Nominal Diameter8"
HF Nominal Diameter2x 1.4"
Nominal Impedance
Loudspeaker Nominal ImpedanceFront LF: 8 Ohms - Side LF/MF/HF: 8 Ohms
Power Capacity
Loudspeaker Power Capacity (RMS/peak 10 ms)Front LF: 450/1800 W - Side LF/MF/HF: 250/1000 W
Frequency Range
Frequency Range54 Hz - 18 kHz
Dispersion Angle120°
SPL Max144 dB

Write a review

Note: HTML is not translated!
Bad Good