OBERTON D71CN
OBERTON D71CN 1.4” High Frequency Compression Driver, 2.85” voice coil, 100 W, 108.5 dB, 8 Ohm
- Condition: New
- Stock: Pre-Order
- Model: D71CN
0.00€
Price Ex Vat
speakers
technology
sound
The D71CN is 1.4” high frequency compression driver, which features a carbon composite dome and high damped vented suspension, providing high output with very low distortion and very good response from 700 to 17500 Hz. The voice coil assembly is easily fielded replaceable without soldering.
The D71CN driver offers all the benefits of new line of OBERTON drivers at reduced cost and weight.
| Speaker Diameter | |
| HF Nominal Diameter | 1.4" / 36 mm |
| Nominal Impedance | |
| HF Nominal Impedance | 8 / 16 Ohms |
| DC Resistance | 6.73 / 10 Ohms |
| Minimum Impedance | |
| HF Minimum Impedance | 8.35 / 11.7 Ohms |
| Power Capacity | |
| HF Power Capacity | (1-20 kHz) 100 W |
| Program Power | |
| HF Program Power | (1-20 kHz) 200 W |
| Sensitivity | |
| HF Sensitivity | (1 kHz - 10 kHz) 108.5 dB/W/m |
| Frequency Range | |
| HF Frequency Range | 500 - 17500 Hz |
| Voice Coil Diameter | |
| HF Voice Coil Diameter | 72 mm (2.85 in.) |
| Voice Coil Material | |
| HF Voice Coil Material | Copper Clad Aluminium Wire |
| Voice Coil Former | |
| HF Voice Coil Former | Kapton™ |
| Crossover | |
| Recommended Crossover | 1 kHz or higher 12 dB/oct.min |
| Cone Material | |
| Diaphragm Material | Carbon Composite |
| Magnet Material | |
| HF Magnet Material | Ferrite |
| Flux Density | |
| HF Flux Density | 1.6 T |
