OBERTON NDC72CN 1.4” High Frequency Compression Driver, 2.85” voice coil, 100 W, 111 dB, 8 Ohm
- Condition: New
- Stock: Pre-Order
- Model: NDC72CN
speakers
The NDC72CN is compact powerful 1.4” neodymium high frequency compression driver, which features a carbon composite dome with high damped vented suspension, providing high output with very low distortion. The new carbon composite technology reduces breakup modes and ensures excellent Waterfall Response of the driver. These new dome materials provide perfect vocal reproduction with very warm and clean sounding. The neodymium magnet, top and back plates are treated with special high quality epoxy electro-deposition coating, which extremely improves the corrosion resistance of the driver.The voice coil assembly is easily fielded replaceable without soldering. It is designed for a wide variety of applications in high quality, high power professional reinforcement systems and stage monitors.
| Speaker Diameter | |
| HF Nominal Diameter | 1.4" / 36 mm |
| Nominal Impedance | |
| HF Nominal Impedance | 16 Ohms |
| DC Resistance | 10 Ohms |
| Minimum Impedance | |
| HF Minimum Impedance | 12.7 Ohms |
| Power Capacity | |
| HF Power Capacity | (1-20 kHz) 100 W |
| Program Power | |
| HF Program Power | (1-20 kHz) 200 W |
| Sensitivity | |
| HF Sensitivity | (1 kHz - 10 kHz) 111 dB/W/m |
| Frequency Range | |
| HF Frequency Range | 800 - 18000 Hz |
| Voice Coil Diameter | |
| HF Voice Coil Diameter | 72 mm (2.85 in.) |
| Voice Coil Material | |
| HF Voice Coil Material | Copper Clad Aluminium Wire |
| Voice Coil Former | |
| HF Voice Coil Former | Kapton™ |
| Crossover | |
| Recommended Crossover | 1 kHz or higher 12 dB/oct.min |
| Cone Material | |
| Diaphragm Material | Carbon Composite |
| Magnet Material | |
| HF Magnet Material | Neodymium |
| Flux Density | |
| HF Flux Density | 1.9 T |
