OBERTON WS2544
OBERTON WS2544 2.75”x 1” High Frequency Line Array Wave Source, 1.75” voice coil, 40 W, 107.5 dB, 8 Ohm
- Condition: New
- Stock: Pre-Order
- Model: WS2544
0.00€
Price Ex Vat
speakers
technology
The WS2544 is high frequency line array wave source with exit 2,75” x 1”. It is based on cuted ( 71 mm high ) version of neodymium compression driver ND2545. This design allow distance between the drivers axis 74 mm. It has excellent sound pressure over 10 kHz, which is very important for Line Array application.
| Speaker Diameter | |
| HF Nominal Diameter | 2.75" x 1" / 70 x 25.4 mm |
| Nominal Impedance | |
| HF Nominal Impedance | 8 / 16 Ohms |
| DC Resistance | 5.15/10.8 Ohms |
| Minimum Impedance | |
| HF Minimum Impedance | 6.35/12.62 Ohms |
| Power Capacity | |
| HF Power Capacity | (1-20 kHz) 40 W |
| Program Power | |
| HF Program Power | (1-20 kHz) 80 W |
| Sensitivity | |
| HF Sensitivity | (2 kHz - 15 kHz) 107.5 dB/W/m |
| Frequency Range | |
| HF Frequency Range | 1000 - 20000 Hz |
| Voice Coil Diameter | |
| HF Voice Coil Diameter | 44 mm (1.75 in.) |
| Voice Coil Material | |
| HF Voice Coil Material | Aluminium |
| Voice Coil Former | |
| HF Voice Coil Former | Kapton™ |
| Crossover | |
| Recommended Crossover | 1.5 kHz or higher 12 dB/oct.min |
| Cone Material | |
| Diaphragm Material | Sandwich Polyester |
| Magnet Material | |
| HF Magnet Material | Neodymium |
| Flux Density | |
| HF Flux Density | 1.9 T |
