OBERTON 10NHCX 10" Coaxial Neodymium Loudspeaker, 2.5" LF + 1.75" HF voice coil, 250 W + 40 W , 99 dB +110 dB, 8 Ohm + 16 Ohm
- Condition: New
- Stock: Pre-Order
- Model: 10NHCX
speakers
technology
sound
The 10NHCX is a 10" / 1" coaxial transducer with integrated HF horn, designed for use in compact reflex enclosures with high SPL and nominal dispersion of 60 degrees.
The low profile, smooth curvilinear LF cone together with HF horn increase the SPL in vocal range, which ensure big headroom. The cone with water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 62 mm (2.5 in) LF voice coil has Glassfiber former, which together with high temperature resistant resin ensure high reliability by high power. The double aluminium demodulating rings reduce distortion and inductance and improve transient response.
The neodymium 1" exit compression driver adopted is our ND2545 model. The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end.
| Speaker Diameter | |
| LF Nominal Diameter | 10" / 262 mm |
| Nominal Impedance | |
| LF Nominal Impedance | 8 Ohms |
| DC Resistance | 10.6 Ohms |
| Minimum Impedance | |
| LF Minimum Impedance | 6.6 Ohms |
| HF Minimum Impedance | 12.74 Ohms |
| Power Capacity | |
| LF Power Capacity AES | 250 W |
| HF Power Capacity | (1-20 kHz) 40 W |
| Program Power | |
| LF Program Power | 500 W |
| HF Program Power | 80 W |
| Sensitivity | |
| LF Sensitivity | (200-1000 Hz) 99 dB/W/m |
| HF Sensitivity | (1-15 kHz) 110 dB/W/m |
| Frequency Range | |
| LF Frequency Range | 70 - 1000 Hz |
| Frequency Range | 70 - 20000 Hz |
| HF Frequency Range | 1-20 kHz |
| Voice Coil Diameter | |
| LF Voice Coil Diameter | 62 mm (2.5 in.) |
| HF Voice Coil Diameter | 44 mm (.75 in) |
| Voice Coil Material | |
| LF Voice Coil Material | Copper Clad Aluminium Wire |
| HF Voice Coil Material | Copper Clad Aluminium Wire |
| Voice Coil Former | |
| LF Voice Coil Former | Glassfiber |
| V.C. Winding Depth | |
| LF V.C. Winding Depth | 12 mm |
| Magnet Gap Depth | |
| LF Magnet Gap Depth | 7 mm |
| Cone Material | |
| LF Cone Material | Paper |
| Basket Material | |
| LF Basket | Die cast aluminium |
| Magnet Material | |
| LF Magnet Material | Neodymium |
| Flux Density | |
| LF Flux Density | 1.55 T |
| HF Flux Density | 1.9 T |
